PF-2 Fluoride Filters + Black Carbon Filtration Elements for Berkey Water Filters
PF-2 Fluoride Filters + Black Carbon Filtration Elements for Berkey Water Filters
Regular price
£179.99
Regular price
Sale price
£179.99
Unit price
per
Tax included.
Free Shipping to UK Addresses
Couldn't load pickup availability
This deal combines Black Carbon Filtration Elements and PF-2 fluoride filters - acting to reduce contaminating substances from any water source.
Compatible with:
- Gravity fed systems
- Travel, Big, Royal, Imperial & Crown series
- Propur Traveler, Nomad, King & Big Series
- Soulton Super Sterasyl & ATC Super Sterasyl filters
- W9361122 & W9361123 Systems
Contaminants reduced by the Carbon Filters include:
Trihalomethanes: Bromodichloromethane; Bromoform; Chloroform; Dibromochloromethane
Inorganice Materials: Chloramine; Chloride; Chlorine Residual
Heavy Metals: Aluminium; Antimony; Barium; Cadmium; Cobalt; Chromium; Copper; Lead; Mercury; Molybdenum; Nickel; Vanadium; Zinc
Also Reduces: MBAS; PCB's; Petroleum Products; Mineral Spirits; Selenium; Thallium; Rust; Silt; Sediment; Turbidity; Foul Taste & Odor
PF-2 reduction elements are specially designed for use in conjunction with the Black Purification Filters to absorb the following unwanted elements found in drinking water: Fluoride, Arsenic V and pre-oxidized Arsenic III, other residual heavy metal ions
It is recommended you replace the Black Carbon Filtration Elements every 25,000 litres (or approximately every 5 years) and the PF-2's every 4000 litres (every 6-18 months)
The number of PF-2's must always correspond with the number of Black Purification Filters put in the upper chamber. For example, 4 Black Purification Filters (2 sets of 2) would require 4 PF-2's (2 sets of 2)
PF-2 filters reduce the filtration flow rate by 15-20%.
Do not boil the PF-2 filters.
Easy installation. No tools required.
PF-2 filters must be primed before use:
1. With blue caps in place, wash the exterior of each PF-2 water filter with a mild dish soap.
2. With clean hands, remove both blue caps from each end of the PF-2 water filters.
3. Place the rubber-priming button (tan coloured) onto one end of the PF-2 and align the hole in the button with the hole in the PF-2 water filter.
4. Press the priming button up against a sink faucet so that the priming button creates a seal between the faucet and the PF-2 filter.
5. Holding the priming button against the faucet, turn on the cold water gently and allow the water to fill the cavity of the PF-2 water filter and discharge from the opposite end.
6. Allow the water to discharge for at least 20 seconds or until the water runs clear, whichever is longer. Hint: Place your thumb on top of the faucet to apply pressure creating a tighter seal.
7. Now repeat the process by turning the PF-2 water filter over and priming the filter from the opposite end in the same manner.
8. Prime each additional PF-2 filter repeating steps 3-6.
8. Prime each additional PF-2 filter repeating steps 3-6.
Further information
Shipping
Shipping to UK addresses is free. Please allow 1-3 business days for delivery. If restocking, please allow 5-10 days. Please ask for information on international shipping.
Returns
Send back unused items within 30 days for a full refund.
Contact
Reach out at any time through our contact page if you have any questions, comments or product requests. Many thanks!
“We forget that the water cycle and the life cycle are one.”
- Jacques Yves Cousteau